Zebra GX420t Wireless WIFI Network Printer Cutter with PSU Cables Labels 880

  
Zebra GX420t Wireless Network Thermal Label Printer with Ribbon installed, Charger and USB Cable. There is an auto cutter installed on the printer. In good working condition, good print quality. First of all please download and install ZDesigner driver from Zebra website. Then connect printer to PC via USB Cable and allow Windows to install it. Printer will be ready to work via USB cable.

To configure wireless printer please install and run Zebra Setup Utility- Configure Printer Connectivity- Wireless- Static-Hostname (give name to your printer)- IP Address 192.168.1. Xxx - Assign available IP address between 2 and 254 -Subnet Mask (255.255.255.0) -Default Gateway (192.168.1.254) All addresses provided are for Home Network. It should be runing on 2.4 GHz.

(You can check them by running command: ipconfig /all). If you on corporate network- consult your network administrator. Next page ESSID: type in your router name (Case sensitive)- Choose security mode of your network -Next-tick String in WPA Settings and type in your router password in PSK Name -Next-Finish.

Settings will be sent to printer. It will reset and if everything gone well you should see IP Address on screen and Signal strength percentage. Next step is to install printer in your PC. Zebra Setup Utilities- Install New Printer-Install Printer-Choose GX420t from the list- Next- Add new Printer- Add Port- give a name to printer-Type IP Address you assigned for printer- Port number will be assigned by computer-OK-Choose created port from the list-Finish. Printer driver will be installed and new printer icon will appear in Control panel.

For installation instructions on a Mac please watch this video on Youtube. This item is in the category "Computers/Tablets & Networking\Printers, Scanners & Supplies\Printers".

The seller is "gatolt" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Malaysia, Mexico, Singapore, South Korea, Taiwan, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Guadeloupe, Grenada, French Guiana, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Sri Lanka, Macau, Maldives, Montserrat, Martinique, Oman, Pakistan, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and Tobago, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Norway, Switzerland, Guernsey, Gibraltar, Iceland, Jersey, Liechtenstein, Monaco, Dominican Republic, El Salvador.

1. Input Type: Monochrome
2. Memory: 4 MB
3. Output Type: Black & White
4. MPN: GX42-101722-000
5. Supported Paper Size: A6 (105 x 148 mm)
6. Brand: Zebra
7. Type: Label Printer
8. Unit Type: Unit
9. Technology: Label Printer
10. Maximum Resolution: 203 x 203 DPI
11. Model: GX420t
12. Connectivity: Wireless, Cable
13. Features: Thermal
14. Black Print Speed: 6ips
15. Unit Quantity: 1
16. Product Line: Zebra GX