Zebra GX430t 300dpi Printer Thermal Transfer/Direct with Ribbon PSU USB Labels 757

  

Zebra GX430t Direct Thermal or Thermal Transfer Label Printer. 300 DPI (dots per inch) - very good print quality. It can be used with wax ribbon for Thermal Transfer printing or without ribbon for Direct Thermal printing. If printing without ribbon Media Type must be set to Thermal Direct or it can blink red Ribbon Out error. Then press feed button and keep it pressed until green LED blinks twice and release it.

Printer will Calibrate itself and after that will be ready for printing. For installation instructions on a Mac please watch this video on Youtube. To print from iPhone or iPad you need Air Printer app installed and running on Bluetooth enabled computer to which printer is connected. Then you can print from Air Printer app installed on iPhone or iPad.

Non of Zebra Label printers are AirPrint enabled.