Zebra ZD420 Direct Thermal Label Wireless Printer 203dpi PSU Labels 702

  

Zebra ZD420 Thermal Label Bluetooth Printer with Charger, USB Cable and 250 4x6 labels. In good working order, good print quality, 203dpi. First of all please download and install ZDesigner driver from Zebra website.

Then connect printer to PC via USB Cable and allow Windows to install it. Printer will be ready to work via USB cable. Printer is configured to IP address 192.168.1.116. If you need to install on different IP address do following steps. To configure wireless printer please install and run Zebra Setup Utility- Configure Printer Connectivity- Wireless- Static-Hostname (give name to your printer)- IP Address 192.168.1. Xxx - Assign available IP address between 2 and 254 -Subnet Mask (255.255.255.0) -Default Gateway (192.168.1.254) All addresses provided are for Home Network. (You can check them by running command: ipconfig /all). If you on corporate network- consult your network administrator. Next page ESSID: type in your router name (Case sensitive)- Choose security mode of your router-Next-tick String in WPA Settings and type in your router password in PSK Name -Next-Finish. Settings will be sent to printer. It will reset and if everything gone well you should see IP Address on screen and Signal strength level. Next step is to install printer in your PC. Zebra Setup Utilities- Install New Printer-Install Printer-Choose ZD420 from the list- Next-Add new Printer- Add Port-give a name to printer-Type IP Address you assigned for printer- Port number will be assigned by computer-OK-Choose created port from the list-Finish. Printer driver will be installed and new printer icon will appear in Control panel.

For installation instructions on a Mac please watch this video on Youtube.