Zebra ZD510-HC Thermal Network Wristband Printer Link-OS Bluetooth PSU USB 912

  
Zebra ZD510-HC Thermal Network Wristband Printer with Power supply, USB Cable. Link-OS and Print DNA software can work with this printer. USB, Bluetooth and RJ-45 Ethernet connectivity. Download and install ZDesigner driver from Zebra website before connecting printer. When setting label in ZebraDesigner software choose Orientation - Landscape, in Label Dimensions window set label Width which is not total width but PRINTABLE width.

For adult size wristbands - Sum of Label Margins and Printable Width should amount 279.4mm. (Numbers for supplied cartridge wirstband dimensions). Example: Printable width 200.4mm, empty margin from Left 35mm, empty Margin from right 44mm, then 200.4+35+44=279.4. Label size is taken from cartridge chip and calibration not required. To install as a network printer first install using USB cable, then connect directly to router using network cable.

Then go to Control panel- Add printer-Network printer- Choose Printer isn't on a list- type in IP address from the sticker on printer- Device type-Print Server-ZebraDesigner-ZD510-HC. Install, configure- Add label size, calibrate and you are ready. Now it has Static IP address assigned- sticker on printer. If it is not available on your network- set your own.

Network reset information on sticker. This item is in the category "Computers/Tablets & Networking\Printers, Scanners & Supplies\Printers". The seller is "gatolt" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Norway, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Oman, Pakistan, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and Tobago.

1. Input Type: Monochrome
2. Output Type: Black & White
3. Memory: 16 MB
4. MPN: ZD51013-D0EE00FZ
5. Supported Paper Size: 25.4mm x 279.4mm
6. Brand: Zebra
7. Type: Label Printer
8. Unit Type: Unit
9. Printer Type: Thermal Wristband Printer
10. Technology: Thermal
11. Maximum Resolution: 300 x 300 DPI
12. Model: ZD510-HC
13. Connectivity: Ethernet (RJ-45), USB 2.0
14. Features: Networkable, USB
15. Black Print Speed: 2 ppm
16. Unit Quantity: 1
17. Product Line: Zebra Z